top of page
Search

How to Keep Lifted Concrete From Sinking Again: Downspouts, Sprinklers, and Joint Sealing

Drew Hubbard
Nov 2
4 min read

Updated: Nov 11

Quick answer: The best way to keep lifted concrete from sinking again is to keep water from getting under it. Point downspouts and sprinklers away from the slab, make sure the ground slopes away, and seal the joints and cracks so rain and snowmelt can't wash out the soil underneath.


By Drew Hubbard, owner of Utah Concrete Lifting and Repair in Mapleton, UT. Drew is a licensed General Contractor with 20+ years of construction experience. Updated November 2026.


When we lift a slab, the foam fills the empty spaces underneath and supports it again. But the thing that made it sink in the first place, usually water washing out or softening the soil, doesn't go away on its own. A few simple fixes around the house go a long way toward keeping your driveway, sidewalk, or patio where we put it.


Why water is the main problem


Most sunken concrete in Utah County starts with water. Water from a roof, a sprinkler, or melting snow gets under the slab, carries soil away, or softens it until the slab settles. In winter, water that gets under the slab can also freeze and push it around. If you want the full story, see Why Is My Concrete Sinking?


The foam we use helps here. It's a custom-made 3 lb hydrophobic polyurethane, made locally by Utah Foam Products, and hydrophobic means it repels water, so it won't wash out. The soil around it can still wash out, though, so it pays to control the water.


1. Fix your downspouts


A downspout that dumps right next to a driveway, walkway, or patio puts a lot of water in one spot every time it rains or the snow melts off the roof.


  • Add a downspout extension or splash block so the water lands away from the concrete.

  • Check that the water actually flows away and doesn't pool next to the slab.

  • Keep gutters clean so they don't overflow onto the concrete edge.


2. Aim your sprinklers away from the slab


Sprinklers are one of the most common causes we see. A sprinkler head that sprays the edge of a sidewalk or driveway soaks the soil under it every day all summer.


  • Turn or adjust heads so they water the lawn, not the concrete.

  • Fix leaking heads and broken lines near the slab right away.

  • Watch for soggy spots or water running along the edge of the concrete.


3. Make sure the ground slopes away


Soil and landscaping next to the slab should slope away from it, so water runs off instead of soaking in at the edge. If a flower bed or lawn is higher than the concrete and drains toward it, water will find its way underneath.


4. Seal the joints and cracks


Open joints and cracks let rain and snowmelt straight under the slab. Sealing them is one of the simplest ways to protect a lift.


For our crack and joint caulking service, we grind, clean, and prep the crack or joint, put in a backer rod or the right fill material, and then inject a silicone or polyether sealant that stays flexible. If you want, we can top it with a sand mix so it blends in with the concrete.


5. Keep an eye on it


Walk your concrete a couple of times a year, especially after winter. Look for new gaps along the edges, joints that have opened up, or water pooling near the slab. Catching it early is easier than fixing it later.


What if it settles again anyway?


We back our lifting with a 3-year warranty. If a slab we raised settles more than 1/4 inch within three years, we come back and reposition it. A fuel fee may apply. The details are on our warranty page.


Quick checklist


What to check

What to look for

Simple fix

Downspouts

Water dumping next to the slab

Add an extension or splash block

Sprinklers

Spray hitting the concrete edge

Turn or adjust the heads

Grading

Soil sloping toward the slab

Regrade so water runs away

Joints and cracks

Open gaps that let water in

Seal them with flexible caulking

Twice a year

New gaps or pooling water

Fix it early


Keeping lifted concrete level: FAQ


How soon can I use my concrete after it's lifted?


You can walk on it right away. Keep vehicles off for at least 4 hours, and up to 24 hours.


Should I seal the joints right after lifting?


Sealing joints and cracks is a good way to keep water out after a lift. Ask us about adding crack and joint caulking when we come out.


Can you lift concrete in the winter?


Yes, when it's above 40°F and the slab is clear of snow and ice. See Can You Lift Concrete in a Utah Winter?


Is there a minimum charge?


No. There's no minimum job charge, so a single sidewalk square is worth a call.


Do you seal flat concrete too?


Yes. As a side service, we seal flat concrete by densifying it. See our densifying and sealing page.


Pricing is in our Utah concrete lifting cost guide, and more answers are on our concrete lifting FAQ page.


Get a free estimate


If you've got a sunken driveway, sidewalk, patio, or steps anywhere in Utah County, call or text (385) 398-9886 or chat with us for a free estimate.


Drew Hubbard, Utah Concrete Lifting and Repair


1565 West Park Meadows Drive, Mapleton, UT 84664 · (385) 398-9886

 
 
 

Recent Posts

See All
How Long Does Concrete Lifting Last in Utah?

Foam concrete lifting is a long-term fix when the water problem under the slab is handled. Here's what makes a lift last in Utah County soil, and what our 3-year warranty covers.

 
 
 

Comments


bottom of page